Saturday, 24 May 2014

Large Update

While I haven't managed to get a blog post in, I have still been working quite hard on the project. After having spent a longer time than I would have liked to on configuring and deciding on which technology I will be using to transport IPv4 traffic over my IPv6 core, of which there is a surprising lack of information on as it seems more people are concerned with sending IPv6 traffic over an IPv4 network. Even though it seems that the reverse will be more important in future. Anyway some of the technology I looked into was basic tunneling, potentially using IPSec to send information securely and the one I was more trying to get to work, using MBGP to send information of IPv4 routes using the fact that it can send information about multiple protocols over it's network but because I had spent too much time on it It was decided that I would cut my losses and get connectivity going first so a simple IPv6 GRE tunnel was implemented.

Some other concepts I looked into for transporting the packets across the IPv6 core were NAT64, dual stacking and others but I will probably go back and re-examine other alternatives once I have everything set up correctly and running smoothly. I also looked into the concept of NAT444 or carrier-grade NAT/Large Scale NAT. Which seems like it could bring about a lot of problems connectivity wise

Due to some equipment problems it also took me longer than it should have to get end to end connectivity running as well, having some problems with DHCP and end devices, However I have now successfully managed to configure DHCPv6 and DHCPv4 to assign addresses and even successfully got Prefix-Delegation for DHCPv6 running. I can now move onto the next step which is setting up the servers and getting services running across the network.

Another thing I have come do a decision on is the type of internal routing protocol I will be using for the core of my network, After all the research into the advantages and disadvantages of the main 3, the benefits OSPF provides to my network with it's scalability, and easier to manage areas  providing an easier way to break up different regions while still maintaining a lower amount of routing table overhead. Although in exchange since the equipment I am working on is all cisco equipment I sacrifice the native speed of EIGRP as well as the speed of the feasible successor route, OSPF offers more benefits for my particular network

No comments:

Post a Comment