Friday, 25 April 2014

Initailly the plan for today was to go and start doing some actual configurations, but I completely forgot that today was ANZAC day and wasn't able to procure a ride. So I continued on looking into IPV6 features of DHCP and trying to better understand them. Prefix-delegation could be something that could really fit in well with the project and should allow for the creation of an easier address scheme to follow. I am unsure on how fully safe it would be (or if the equipment can support) the use of rapid-commit but it's something i'll try and look more into because it can make the DHCP process alot faster.

Also learned that DHCPV6 also takes advantage of route processor redundancy in devices that have multiple route processors and stateful switchover. Probably won't be able to play around with that though since the equipment I have access to doesn't have those capabilities, But is still useful information to keep on hand

Wednesday, 23 April 2014

Revision Day

While looking into IPV6 solutions for different services, I found the need to refer back to the textbook on occasions to refresh my memory on how IPV6 works and configurations. So I decided to use today to refresh my knowledge on the subject mainly in the textbook chapter of CCNP route, and some other sources online. A bit annoying because not much progress was done but it doesn't hurt to reinforce information learned. While I was at it I also revised on the topics of DNS and DHCP in IPV4 just in case I need to revert to using them in the case that IPV6 features arent available with the equipment on hand

Creating basic connectivity

Started research into optimal choices in creating the basic connectivity by investigating and writing down the different advantages and disadvantages of cable types. Things like speeds, price, maximum distance, interference, security and how the cables function were all taken into account into the decisions on what to select for what portions of the network. Also began looking into DHCP and DNS options for ipv6 functionality and what that entails in terms of advantages for the network over ipv4.

Another thought that came to me in the midst of research was if it's possible to implement a pseudo DSLAM in the form of a switch. At the end of the day a DSLAM from what i can tell without any research just bundles a bunch of subscriber lines into one and sends the data to the main area of exchange. Will discuss and see if it's possible to implement in final project.

Thursday, 3 April 2014

Pushed a bit too far

perhaps i should not have pushed for 12 hour days on monday and tuesday as wednesday i was still unwell, i managed to at least get started on my presentation for next week as well as the budget and gantt chart.

Tuesday, 1 April 2014

Back in Action

OK after the chaos of the last week I am back in action and ready to hit the ground running. First and foremost I have completed the initial topology of the project as well as from here on be listing my daily activities and intentions for the project as well as some personal musings and potential ideas for future additions. First up is the version 1.0 of the topology that has just the server and services side of the ISP as well as the exit point to the internet. At the advice of my Supervisor I looked into Data Center topologies to learn of the logic behind creating data Centers and this was the first Idea for a topology to come to mind. I grouped all the services that any customer should have access to together and will place them inside a DMZ and have servers available to be rented to customers inside private VLAN's.



This topology is only 1.0 and most likely will change when i add in security features and monitoring devices well as any other potential future expansions to the project.

Other achievements i have looked into today is more research on DNS caching and Web caching on an ISP level and why it's done and how it can benefit my project as well as my preparation for my first progress presentation next week.