Sunday, 28 September 2014

DHCPv6 Problems

DHCPv6 Problems

found a rather large problem with DHCPv6 today in that it does not actually complete the DHCP process and exchange information on ipv6 and servers and services unless both the managed and other bits (parts of dhcpv6 conversation packets) are actually set. Took quite a long time to try and actually find out this problem and after re-checking my network quite a few times, finally figured it out with the help of the cisco support website and some guidance from a supervising lecturer.

However, i will probably never forget this now with how much trouble it gave me

16/09/2014

IPv6 networking problems

once again blogger is doing something weird so i'll update everything again



went back to learn some more on ipv6 subnetting, something still isn't clicking properly for me with it but i'm understanding the concepts in order to create a proper subnet formation for the customers.

using some online resources for learning and calculating to check my results as well as re-reading the ccnp chapter on IPv6 configurations since that's what helped when i was doing OSPFv3

https://supportforums.cisco.com/document/66991/ipv6-subnetting-overview-and-case-study
http://techxcellence.net/2011/05/09/v6-subnetting-made-easy/
http://www.gestioip.net/cgi-bin/subnet_calculator.cgi

(15/09/2014)

Wednesday, 24 September 2014

updates not publishing

Ok so since it seems there was a problem with my blog in that it didn’t seem to be publishing things, and instead just saving them in draft, these next few posts will be what SHOULD have been posted, along with their respective dates.

Found a program called DNSmasq, in a nutshell it is a single daemon that runs both DNS and DHCP servers. From a guess having 1 daemon running instead of 2 seems like a good idea (granted I’m not sure how much processing power the combined ones are) at the very least this will make configurations a lot more streamlined and easier instead of dealing with 2 separate servers.
Supports both DHCP and DHCPv6 as well as prefix delegation. Also allows dns to choose from local hosts or by importing names from the dhcp subsystem. Even allows for DNSSEC validation (might check into this during security phase)

(12/09/2014)

Monday, 1 September 2014

IPv6 Info

found a really good site that looks like it will help me in setting up services for ipv6 on the raspberry pi with both DHCP and Apache, might need to look a bit deeper into DNSv6 but i'm worried that it isn't supported enough yet for it to be present on the pi. Also got the web server properly up and running, turns out that the apache directory was pointing to the wrong file and not the html file i had created for my website and that's working fine now, will post some pictures of the webpage when i get home. Also starting to come down with some kind of bug but will try and keep the blog up to date with my work. Also if i'm understanding the daemon for dhcp that i got for the pi correctly this is also capable of prefix delegation

http://mirrors.bieringer.de/Linux+IPv6-HOWTO/index.html

Thursday, 28 August 2014

web server downloaded and test pages

having some issues setting up the apache web server on the raspberry pi,i can't seem to open the page that i created remotely. going to try and take a break for the rest of today and tomorrow due to other assignments but during the weekend i will also be looking into setting up a DHCPv6 server and possibly DNS6 server on the pi as well, but i don't have too many high hopes if i can't get it.

Tuesday, 26 August 2014

missing post #3

so far both DHCP and DNS services are running smoothly on the PI, the only thing left to get running is a web server. Looking into light version of apache as i do not want to put too much strain on the pi, then i have to check to make sure that all of the processes can at least operate at the same time whilst on the network. Have to halt here for now though as i have to begin preparing a practice presentation on what i've done so far

Sunday, 24 August 2014

Missing post #2

after i lost access to my machines for a while i had to decide on what to do with the project from there, Looking at my options they were rather limited to hopefully being able to request a dedicated device for a server from the polytech. But I decided to try and take advantage of the raspberry pi that i had borrowed beforehand and use it as a linux server since it uses a version of debian that can be used to host a lot of things. This started my first proper look into getting the raspberry pi working although it was slightly different from the purpose i had originally intended

missing post #1

the initial plan was to set up my spare laptop as a linux based server to play around with ubuntu and set it up as a server for DNS, DHCP, and a web server hosting a single page test website. I managed to install it successfully and since i'm not fluent in linux i still used the gui in order to find my way around CLI since people seem to find it easier using a visual representation of things. I managed to get a DHCP server set up with a static IP before something rather large happened in my life and i was unable to use my machines for a while.

Saturday, 23 August 2014

Pre-update update

So due to some rather large circumstances i had no access to my computer or the internet for the past couple of weeks. Due to this it has been rather difficult to keep up with the blog posts, however there has been significant progress made toward the end goal of the project. Over the period of next day I will be uploading all of the relevant blog posts that I had written down in the period when i had nothing i could use

Tuesday, 15 July 2014

Busy week

So i've gotten the hang of normal ubuntu and have been re-learning old command line commands since apparently the server pack does not include a gui, but I have a pretty busy week ahead of me with yesterday having to prepare the house and tomorrow and thursday having appointments but i will try and get the server program up and running and looking into setting up dhcp and dns to run smoothly. The dual booting also worked out ok and i learned some interesting things about the windows OS and how it overwrites everything when it installs whereas with ubuntu it allowed me to do it side by side with windows so thats probably something good to remember for the future.

Thursday, 10 July 2014

Irritating weather

So it seems I've been unable to get much research or information gathering done over the past few days due to the weather affecting my connection so I'm probably going to take today off from doing things until i can get a bit of consistency. But having played around with ubuntu and while it is a little out of the ways of the project i am going to try and set up dual booting on my laptop to allow for a portable version that i can possibly use while working on the equipment. So I'll probably be spending my time today on that and getting that up and running and hopefully when things clear up i can look more into the server side of ubuntu since if i understand right it comes in the package

Monday, 7 July 2014

Managed to get some practice on ubuntu

so i successfully installed ubuntu on the extra drive, only the desktop version so far though with the gnome gui. There are a lot of things that look much different to when i learned about linux using centOS so i'm probably going to spend a bit more time learning my way around before moving on to setting up the server. But at the very least the OS is working well.

Saturday, 5 July 2014

Only a small update

For the most part things in my personal life have been taken care of, a few things still lingering but at least now i can get restarted on the project front, managed to find an old hard drive and my notes and am going to spend the weekend setting up different linux versions and looking at the benefits/disadvantages they each have and getting practice on setting one up as a server for different functions (DHCP, DNS, web etc....) I will also be looking into microsoft versions but probably won't be able to get practice on anything except windows 7 as that's what my home machine is however for this weekend it will be all about linux distributions

Friday, 20 June 2014

Final Exam's finally over

with this week i have for the most part finished the report finally after the extension, as well as finished my exams for the semester, have been focussing on both as well as having to deal with more life problems which has consumed most of my time for the past 2-3 weeks which i would rather have spent working on the project. Going to take a 1 week break because of stress right now and try and evaluate what i need to do next and going forward from here. A lot has happened this semester both in life and in regards to school work but i do need to keep the blog up to date and will be updating and possibly overhauling things a bit over the next 2 days including adding an updated topology as well as adding links to other various resources i've been using.

Wednesday, 4 June 2014

Supervisor's meeting

Meeting with the supervisor was good, helped me decide on what to do with the report troubles I seem to be having in how in depth I need to go on the details on my project. Currently writing up a draft to present to others for proofreading and hope that I'm able to achieve the criteria for content at least.

Also got some help with the server problem, I've been trying to do research into between a linux solution and a microsoft solution. Which has been pretty much summarised down to the concept's between the 2 with linux being more of a community driven OS as opposed to microsoft It would most likely be better to pick microsoft since as part of the project I am deciding on behalf of the company I work for and microsoft can guarantee me support and security for my company. Setting up the servers shouldn't be too much of a problem but I will need to have access to machines that can run the OS. So a possible virtual machine option is open to me as well.

Already looking into the future on security aspects which I have considered at each point of the research process, the options I am looking into so far on the matter of public servers is technologies such as PVLan, DMZ, whether or not to add the security devices we have into the current topology, as well as positioning in the topology of monitoring equipment

(edit: this was supposed to be published at the end of last week but for some reason only saved as a draft)

not much I can do this time around the semester

Mainly focusing on getting the report completed, cut back a lot of duplicate content and now i'm slightly worried i won't have enough, as well as preparing for the exam and final test I have coming up. Hopefully I'll be able to get things running over the break and be able to fully catch up with what i've been unable to accomplish. Hoping to get servers up and running by the time the break finishes as well as getting them integrated into the larger network and being accessible and i'm also looking into learning some basic HTML in order to set up a basic webpage to access

Saturday, 24 May 2014

Large Update

While I haven't managed to get a blog post in, I have still been working quite hard on the project. After having spent a longer time than I would have liked to on configuring and deciding on which technology I will be using to transport IPv4 traffic over my IPv6 core, of which there is a surprising lack of information on as it seems more people are concerned with sending IPv6 traffic over an IPv4 network. Even though it seems that the reverse will be more important in future. Anyway some of the technology I looked into was basic tunneling, potentially using IPSec to send information securely and the one I was more trying to get to work, using MBGP to send information of IPv4 routes using the fact that it can send information about multiple protocols over it's network but because I had spent too much time on it It was decided that I would cut my losses and get connectivity going first so a simple IPv6 GRE tunnel was implemented.

Some other concepts I looked into for transporting the packets across the IPv6 core were NAT64, dual stacking and others but I will probably go back and re-examine other alternatives once I have everything set up correctly and running smoothly. I also looked into the concept of NAT444 or carrier-grade NAT/Large Scale NAT. Which seems like it could bring about a lot of problems connectivity wise

Due to some equipment problems it also took me longer than it should have to get end to end connectivity running as well, having some problems with DHCP and end devices, However I have now successfully managed to configure DHCPv6 and DHCPv4 to assign addresses and even successfully got Prefix-Delegation for DHCPv6 running. I can now move onto the next step which is setting up the servers and getting services running across the network.

Another thing I have come do a decision on is the type of internal routing protocol I will be using for the core of my network, After all the research into the advantages and disadvantages of the main 3, the benefits OSPF provides to my network with it's scalability, and easier to manage areas  providing an easier way to break up different regions while still maintaining a lower amount of routing table overhead. Although in exchange since the equipment I am working on is all cisco equipment I sacrifice the native speed of EIGRP as well as the speed of the feasible successor route, OSPF offers more benefits for my particular network

Wednesday, 14 May 2014

Blog post for yesterday

Yesterday was very very good in terms of productivity, I managed to note down all the different versions and capablities of the OS images on the devices I have access too, and managed to test and get successfully working most of the features I plan to implement on the actual equipment. Prefix delegation for IPV6 was a big achievement that I managed to get working and works like a dream but not every device can support it so I have to plan carefully around which devices I can use. Tunneling protocols were also tested and unfortunately I had to leave before i could attempt dual stacking. But i continued to study up on the routing protocol differences in some spare time i had.

Unfortunately I will not be able to get much done today because I have to fill in for work for someone who was ill and could not make it at the place where I currently reside but I will still try and get some study or research in during the breaks. Right now I am currently looking into operating systems and features to implement on the server side of things

Saturday, 10 May 2014

Much needed blog post

Time for a much needed update, I've been meaning to get back to MiT in order to assess the gear and test whether they are capable of running dual stacking and to figure out the appropriate tunneling transition method to implement but due to circumstances I have been unable to get transportation in for now. So I have been playing around with packet tracer to see if that can do it and to get some practice on setting it up. I have also spent time looking more in depth into the IPV6 variants of the routing protocols (EIGRP,RIP,OSPF) to see which one would be the most efficient on the gear I am using which has required me to both search online for speeds as well as reading through the text book again. I have also decided to add another section into the ISP itself and will post more about that next week.

Saturday, 3 May 2014

Tunneling and transition Technologies

Didn't update yesteday since i couldn't get into google from where I was staying, but my research continued into Transitioning techniques for ipv4 customers going through the ipv6 network, after looking into and researching the many different techniques (teredo, ISATAP, tunnel brokers, 6to4, dual stack) it would probably be best to use 4in6, but the question i need to answer is where to apply it, Since i'm providing the equipment to the businesses it would probably be best to do it there. I'm not sure if dual stack is possible with the equipment i have access to but i will experiment and see if the devices can handle the loads from running both ipv4 and ipv6 at the same time. If they can dual stack will be a more ideal method but if not i have a fallback in 4in6, Also finally got my head around ipv6 subnetting. Once everything gets back to binary it becomes much much easier to deal with

Friday, 25 April 2014

Initailly the plan for today was to go and start doing some actual configurations, but I completely forgot that today was ANZAC day and wasn't able to procure a ride. So I continued on looking into IPV6 features of DHCP and trying to better understand them. Prefix-delegation could be something that could really fit in well with the project and should allow for the creation of an easier address scheme to follow. I am unsure on how fully safe it would be (or if the equipment can support) the use of rapid-commit but it's something i'll try and look more into because it can make the DHCP process alot faster.

Also learned that DHCPV6 also takes advantage of route processor redundancy in devices that have multiple route processors and stateful switchover. Probably won't be able to play around with that though since the equipment I have access to doesn't have those capabilities, But is still useful information to keep on hand

Wednesday, 23 April 2014

Revision Day

While looking into IPV6 solutions for different services, I found the need to refer back to the textbook on occasions to refresh my memory on how IPV6 works and configurations. So I decided to use today to refresh my knowledge on the subject mainly in the textbook chapter of CCNP route, and some other sources online. A bit annoying because not much progress was done but it doesn't hurt to reinforce information learned. While I was at it I also revised on the topics of DNS and DHCP in IPV4 just in case I need to revert to using them in the case that IPV6 features arent available with the equipment on hand

Creating basic connectivity

Started research into optimal choices in creating the basic connectivity by investigating and writing down the different advantages and disadvantages of cable types. Things like speeds, price, maximum distance, interference, security and how the cables function were all taken into account into the decisions on what to select for what portions of the network. Also began looking into DHCP and DNS options for ipv6 functionality and what that entails in terms of advantages for the network over ipv4.

Another thought that came to me in the midst of research was if it's possible to implement a pseudo DSLAM in the form of a switch. At the end of the day a DSLAM from what i can tell without any research just bundles a bunch of subscriber lines into one and sends the data to the main area of exchange. Will discuss and see if it's possible to implement in final project.

Thursday, 3 April 2014

Pushed a bit too far

perhaps i should not have pushed for 12 hour days on monday and tuesday as wednesday i was still unwell, i managed to at least get started on my presentation for next week as well as the budget and gantt chart.

Tuesday, 1 April 2014

Back in Action

OK after the chaos of the last week I am back in action and ready to hit the ground running. First and foremost I have completed the initial topology of the project as well as from here on be listing my daily activities and intentions for the project as well as some personal musings and potential ideas for future additions. First up is the version 1.0 of the topology that has just the server and services side of the ISP as well as the exit point to the internet. At the advice of my Supervisor I looked into Data Center topologies to learn of the logic behind creating data Centers and this was the first Idea for a topology to come to mind. I grouped all the services that any customer should have access to together and will place them inside a DMZ and have servers available to be rented to customers inside private VLAN's.



This topology is only 1.0 and most likely will change when i add in security features and monitoring devices well as any other potential future expansions to the project.

Other achievements i have looked into today is more research on DNS caching and Web caching on an ISP level and why it's done and how it can benefit my project as well as my preparation for my first progress presentation next week.

Friday, 21 March 2014

Who I am and what this blog is about

The first post was a bit hastily done and more about happiness about finally getting past certain restrictions on making a blog, so I will use this post to explain who I am and what this blog will be all about.

My name is Richard Finch and I am completing my final year of a Bachelor's of Engineering Technology at Manukau Institute of Technology in this, the year of 2014, and this is a blog about my final year project used to display the knowledge of all I've learned over the course of this degree as well as expanding into new areas and showing I can learn more on my own.

The Goal of this project is to create a working model of a Tier 3 ISP that offers connections and services to its customers as well as connect them to the wider internet. This will include designing and implementing a topology that runs solely on IPV6, while offering a tunnelling service for customers who prefer IPV4 or cannot use IPV6 due to limitations or restrictions, As well as creating an addressing scheme from a range of addresses. It will also feature a connection between the main network and an external one through a proper ISP allowing for a full connection to the internet.

Some of the services I hope to get running and providing to customers are DNS functionality, Web server hosting, and the ability to store data in file servers owned by the ISP all preferably running on a version of Linux. I will also Research different network monitoring software’s and implement based on my findings as well as at the very least basic internal security preventing outside intrusion.

I plan to add more to it as time goes on including a list of extra's that would enhance the end user experience.


Friday, 14 March 2014

FINALLY!!!

Finally managed to get it up and running! there are serious flaws with google and it's 2-step verification process.

anyway first post i have decided on a possible milestone list for goals and hopefully a more straightforward path in completing this project



  • Finalize a topology for the ISP side of the network that will house the servers as well as provide connectivity for a range of customers (2 types for the project)
  • Basic Network Connectivity between end devices and servers
  • Implementing IPV6 making for a full IPV6 network internally (maybe provide a tunnel for customers still using IPV4?)
  • Connect the business customer branch and main routers
  • Research MPLS and apply it to the business customer between main and branch
  • connect roaming customer and allow them to login through the  WLAN solution using a main controller (try and research roaming)
  • research different monitoring software (IPSLA, SNMP, Syslog (if relevant) potentially argos?)
  • Research threats to the network and implement security features for customers and the isp
  • Research Raspberry Pi as a monitoring node