Saturday, 24 May 2014

Large Update

While I haven't managed to get a blog post in, I have still been working quite hard on the project. After having spent a longer time than I would have liked to on configuring and deciding on which technology I will be using to transport IPv4 traffic over my IPv6 core, of which there is a surprising lack of information on as it seems more people are concerned with sending IPv6 traffic over an IPv4 network. Even though it seems that the reverse will be more important in future. Anyway some of the technology I looked into was basic tunneling, potentially using IPSec to send information securely and the one I was more trying to get to work, using MBGP to send information of IPv4 routes using the fact that it can send information about multiple protocols over it's network but because I had spent too much time on it It was decided that I would cut my losses and get connectivity going first so a simple IPv6 GRE tunnel was implemented.

Some other concepts I looked into for transporting the packets across the IPv6 core were NAT64, dual stacking and others but I will probably go back and re-examine other alternatives once I have everything set up correctly and running smoothly. I also looked into the concept of NAT444 or carrier-grade NAT/Large Scale NAT. Which seems like it could bring about a lot of problems connectivity wise

Due to some equipment problems it also took me longer than it should have to get end to end connectivity running as well, having some problems with DHCP and end devices, However I have now successfully managed to configure DHCPv6 and DHCPv4 to assign addresses and even successfully got Prefix-Delegation for DHCPv6 running. I can now move onto the next step which is setting up the servers and getting services running across the network.

Another thing I have come do a decision on is the type of internal routing protocol I will be using for the core of my network, After all the research into the advantages and disadvantages of the main 3, the benefits OSPF provides to my network with it's scalability, and easier to manage areas  providing an easier way to break up different regions while still maintaining a lower amount of routing table overhead. Although in exchange since the equipment I am working on is all cisco equipment I sacrifice the native speed of EIGRP as well as the speed of the feasible successor route, OSPF offers more benefits for my particular network

Wednesday, 14 May 2014

Blog post for yesterday

Yesterday was very very good in terms of productivity, I managed to note down all the different versions and capablities of the OS images on the devices I have access too, and managed to test and get successfully working most of the features I plan to implement on the actual equipment. Prefix delegation for IPV6 was a big achievement that I managed to get working and works like a dream but not every device can support it so I have to plan carefully around which devices I can use. Tunneling protocols were also tested and unfortunately I had to leave before i could attempt dual stacking. But i continued to study up on the routing protocol differences in some spare time i had.

Unfortunately I will not be able to get much done today because I have to fill in for work for someone who was ill and could not make it at the place where I currently reside but I will still try and get some study or research in during the breaks. Right now I am currently looking into operating systems and features to implement on the server side of things

Saturday, 10 May 2014

Much needed blog post

Time for a much needed update, I've been meaning to get back to MiT in order to assess the gear and test whether they are capable of running dual stacking and to figure out the appropriate tunneling transition method to implement but due to circumstances I have been unable to get transportation in for now. So I have been playing around with packet tracer to see if that can do it and to get some practice on setting it up. I have also spent time looking more in depth into the IPV6 variants of the routing protocols (EIGRP,RIP,OSPF) to see which one would be the most efficient on the gear I am using which has required me to both search online for speeds as well as reading through the text book again. I have also decided to add another section into the ISP itself and will post more about that next week.

Saturday, 3 May 2014

Tunneling and transition Technologies

Didn't update yesteday since i couldn't get into google from where I was staying, but my research continued into Transitioning techniques for ipv4 customers going through the ipv6 network, after looking into and researching the many different techniques (teredo, ISATAP, tunnel brokers, 6to4, dual stack) it would probably be best to use 4in6, but the question i need to answer is where to apply it, Since i'm providing the equipment to the businesses it would probably be best to do it there. I'm not sure if dual stack is possible with the equipment i have access to but i will experiment and see if the devices can handle the loads from running both ipv4 and ipv6 at the same time. If they can dual stack will be a more ideal method but if not i have a fallback in 4in6, Also finally got my head around ipv6 subnetting. Once everything gets back to binary it becomes much much easier to deal with